If you plan to replace your metal patio furniture, you should think about putting some money and instead of editing yourself. Although it may seem very convenient to get rid of your furniture and replaced, the time to make your garden furniture to make houden metal itself was only a few days of repair, save money and pay when you see how it is easier than you would expect at first. The key is finding the right material:
Tools Required
• Cleaner
• Sunglasses
• Gloves
• Dremel or other small rotary grinding tool
• sandpaper (grain 60/120/320)
• Liquid Metal Filler
• Auto Glass Compound
• Self-priming
• Painting
• Clear finishing spray
Step 1
Remove all existing colors of furniture cleaner.
Step 2
Use your Dremel to smooth the bumps, holes or rust in the metal where you safety glasses and heavy work gloves. Avoid a weakness or failure of the metal, stopping at a particular location for too long, as this will certainly take them with you.
Step 3
They paint the sand and the rough edges with sandpaper 60. If you do not need the Dremel, sandpaper to smooth the rough edges in 1960. For an even smoother surface, using sandpaper 120
Step 4
Fill holes or depressions caused by corrosion by rust liquid solder. Note that these spots you grind smooth, do not worry, if the load is not correct, or even at the metal surface.
Step 5
Fill with small spots and errors of a very thin market for automotive clutch.
Step 6
After completing the application of liquid metal and glazing compound to ensure that the furniture is completely dry. Glazing compound lasts about 30 minutes to dry and the liquid metal is often completely dry for several hours.
Step 7
Smooth rough edges or stains collected from the liquid metal putty or glazing composition for the 60-K or 120 sandpaper.
Step 8
Accept the car boot on the furniture. Spray at least two preparatory three layers on the metal for it to dry between each coat. If this process along, please use a hair dryer.
Step 9
Do one last polish the furniture soft after a good last longer, may have missed in the search for a small rough spots you. Use the sandpaper 320-fine for a smooth finish.
Step 10
Bring color and furniture painted white.
There you have it. If furniture is metal against rust on the steps, keep in mind that there is great potential for finishing furniture does not lose with you, good furniture and spending a lot of money for new furniture, you do not really need.